Glowdriver: (with Charger)
1800mAh
2800mAh
4500mAh
 

Glowdriver with meter:
Including charger and removeable 1800mAh battery

Heatgun: With two speed blower and temperature control.

Sealing Iron:
With cotton sock and stand

Easzy Glow Glowdriver:
Works directly off 3.5 to 20 Volt.

Voltmeter:
The safe way to check your Rx battery. Measures 3.7 to 20 Volt

Micro Tachometer:
Measure 2, 3 and 4 bladed props

Tx Neck strap:
For those who want precise stick control

Locking socket:
With Aligator clips

Z-bend Pliers:
Makes push-rod bending quick and easy

12V Starter:
GH7270 (60)
GH7275 (90)
GH7276 (120)

Kwik Clip:
The glow clip that doesn’t wear out

Remote Glow Plug Connector: For those fully cowled motors

Remote Glow Plug Adapter:
(With negative wire for Heli-copter)

Remote Glow Plug Adapter: For airplane

Li-po Regulator:
4.8V 5A
6.0V 5A

Rubber Ring:
For Starter

Portable Starter Battery:
Gell 12V 1.3mAh

Complete Starter Set:
Including: Glowdriver and Charger
Fuel Pump
Plug spanner      

Fuel Pump Hand Crank:
Model 1626

Fuel Pump Electric

Power Panel:
With Charger for Glow Driver (Super)

Diagonal Cutting pliers

Needle Nose Pliers

Ball Link Pliers Curved

Ball Link Pliers Straight

Fuel Pick-up Clunk Filtered

 Fuel Tubing Recoil

Filler Nozzle

Fuel Pump Gas 12-15V

Prolux Supreme 30 AMP Power Supply with EU Plug

Features
• AC 100V-240V worldwide voltage hi-tech   application
• DC 12V 30A stable voltage output system
• Built-in large DC cooling fan
• The interior setting voltage is 13.8V +- 0.1V
• With LED light to indicate the power on
• Banana jack output designed for most RC modeling chargers and devices
• Hi-stable IC makes stability output voltage

Prolux Grand Power 12V 20A switching power supply

Features:

• AC 100V-240V worldwide voltage hi-tech application
• DC 12V 20A stable voltage output system
• Built-in large DC cooling fan
• The interior setting voltage is 13.8V +- 0.1V
• With LED light to indicate the power on
• Banana jack output designed for most RC modeling chargers and devices
• Hi-stable IC makes stability output voltage
• Dimensions: 210x140x85mm

 Multi Battery Checking Device

Product Specification:
New design multi battery checking device. Great for monitoring battery power before using battery for radio control models or hobby device.

Features:
-10 bits FUJITSU MCU IC design; reading voltage accurately
-Reverse voltage protection
-Large LCD display shows battery voltage and 10-step capacity icon
-Capable of measuring : Li-Po 1-7cell (3.7V - 25.9V)
Li-Fe 1-7cell (3.2V - 22.4V)
(Voltmeter detecting range is between 3.5V - 31.5V)
-Capable of measuring : Ni-Cd/MH 4-8cell (4.8V - 9.6V)
The test result for Ni-Cd/MH shows under condition of 330mA current loading and test range is between 3.5V - 12.2V

Power panel Multi Function 2674

- Super regulator design - the stable voltage (1.5V) output can automatically supply the current according to glow plug size to achieve lowest heat dissipation
- Four sets of power supplies for a. 1.2V glow ignitor b. glow starter / 1 - 8Cell Ni-Cd/MH 0.5 - 5.0A charger c. 12V power station d. 12V installed electric fuel pump
- Switch selectable fuel direction also included a push-on/off power switch
- Fuel proof Nylon with Fiberglass filled can work with any kinds of fuel oil
- Included a large LCD to monitor the glow plug size, charge current, time, and voltage
- Reverse polarity protection guarantee